esp32-evse installer

  1. Connect the EVSE board to your computer using USB or serial-to-USB adapter
  2. Press Connect button and select connet serial port
  3. Confirm install in the popup dialog, some boards must be manualy switched to flashing mode by holding IO0 buton while reset (for ESP32-S2 EVSE DIY Alpha this is the WiFi button)
  4. Let the firmware install
  5. Set up a WiFi network in the dialog, if none is set up
  6. Then click Visit Device, should open Web interface of EVSE board
  7. Go to settings / files
  8. Then adjust board.yaml according to your hardware and restart the board
Installer powered by ESP Web Tools.